E-mail: sales@gidi-chain.com

Under what circumstances is the conveyor chain most likely to wear and deform

2019-12-04 15:37:33

The conveyor chain is specially used for the flat top conveyor. Although it is a simple chain, the complex operation environment and less turning radius can damage and deform the chain. Regular inspection of the chain operation and lubrication will have a great impact on the whole work of the conveyor chain.

The chain can not be operated in a twisted environment. It is arranged in two systems with side bending and flat top chain. Although the transport chain is also made of engineering plastics, the hinge ring at the other side of the chain is united with the pin roll. It is often used to transport glass bottles, metal cans, various plastic containers, packages, buffet items and mechanical parts, etc. it is called the movable hinge ring.

Especially in the automatic production configuration, the flat top chain layout is very simple. In the environment of transporting limestone, slag, clinker and other huge things, it is called solid hinge ring, which is engaged with the driving sprocket for operation, running on the support track and small chain wear and elongation. One side of the hinge ring on both sides is firmly united with the pin shaft.

Flat top plate chain conveyor is also called plate chain conveyor, chain plate conveyor. The flat top chain used for conveying the mechanical equipment has a straight flat top chain. The transport chain is very necessary for those who are engaged in the planning and application of the chain conveyor. Only a chain plate with two sides of hinged rings and a key pin shaft, if any chain has problems, the whole transport department may not be able to leave the track.

The chain for the transporter shall be sufficient to carry the goods. The roof chain is divided into turning and straight-line type. The strength of the straight flat top chain is not lower than that of the steel simple hinge roll type flat top chain. These are all modifications that can be probably used in different application places. Most of the chains are made of the chain plate, chain pin, shaft sleeve and other parts.

Therefore, after the installation of the line body, it is necessary to check whether there is abnormal sound in the transmission seat and whether the adjustment seat is flexible and retractable after the installation of the line body of the conveying chain. Of course, we need to remind you that the whole work is affected and the required function cannot be achieved. If there is residue blocking the chain and powder entering the chain with inferior lubricating oil, it should be cleaned in time.

But at the critical moment, it is the straw for the staff to save lives, so its quality must not be ignored, otherwise it will affect the operation after the conveyor chain, and even cause the strike of the whole machine. Therefore, the importance of the conveyor chain can be imagined, whether there is abnormal sound in the elbow and the lifting part, and whether the chain operation shakes.

Because there are reinforcing ribs on the chain plate, so as to improve the strength of the chain. Some of them are equipped with guide bearings on the chain plate, others are equipped with rollers on the chain plate, which not only affects the production, but also may cause casualties. The chain is the core part of these transport configurations. The double bending and reinforcing rib hinge type, so that the layout of the chain plate can accept the larger shape as necessary.

In case of any abnormity, the line body shall be removed in time after normal operation, and the chain shall not be operated for a long time beyond the normal operating temperature. The elbow and lifting shall be replaced in time if they are worn out. For example, solid high-temperature grease shall be used to master the actual temperature of the oven, and the oil dispenser or oil cup shall be used to inject liquid high-temperature lubricating oil after the lubricating oil is injected into the conveying chain, so that the lifting is quickly worn out Therefore, its operation rationality must be considered in the design.