Xiaobian has witnessed such accidents, which are often caused by the promotion of a building material industry and the sudden rupture of the conveyor chain or connection.
Conveying chains are generally used on conveying equipment, such as food conveying machinery, fertilizer conveying equipment, mining machine chains and so on.
In order to reduce its wear and tightening, we can choose chains with better quality, so as to improve the processing accuracy of gears and the hardness of working face.
If the chain wear does not exceed the limit, then a group of chains can be removed and adjusted to the appropriate tightness, but this will happen in practice; if a group of chains is not too long, a…
Whether the chain is installed correctly or not directly affects the quality of the chain drive and the service life of the chain. So how to install the chain correctly
Lubricating grease with low viscosity or dropping point around 70 degrees is also suitable for manual lubrication. In some special occasions, liquefied grease is used for spraying.
Sprockets should be installed on axles without skewing or swinging. In the same transmission component, the end faces of two sprockets should be located in the same plane.
Chains are usually metal rings or rings, which are mostly used for mechanical transmission and traction. Chains used to obstruct traffic passages (e.g. in streets, rivers or harbour entrances), chain…